FOILS

HIGH PERFORMANCE - LIGHT WEIGHT

Sizes: XS220 / XS300

The best part of the last 5 years has been the rise in hybrid development and crossover technology amongst sports. No where is this more evident than in foil boarding. The hydrofoil has become the common denominator in all of the surf and wind sports today.

Therefore, it reasons that its important to have a hydro wing-set capable of crossing between sporting genres with flawless performance and capability. Enter the X Series™ wings from Cabrinha. The design of the X Series™ recognizes and exploits the most important features needed in all hydrofoiling genres. Lift, efficiency and control are the three pillars that drive the X Series’ high performance and buttery smooth ride.

Through a combination of outlines and wing profiles the X series delivers a smooth lift and stable flight with precise turning and control.

The X Series’ efficiency is enhanced by our all new Cab Fusion mast and fuselage ecosystem. The Cab Fusion is a redesign from the bottom up to remove any unwanted ‘play’ in the system while streaming the connection between the wings and the fuselage. The resulting increase in stiffness and reduction in drag puts the X Series wings into an all new class of hydrofoils.

DESIGN PROFILE
Swept LE, Straight TE, Lean profile, minimal anhedral with downturned tips.

WING FEATURES

• Optimal efficiency and lift
• Flat center, to downward tips, for perfect balance between locked-in feel and agility
• Recessed design for minimal drag
• Full prepreg carbon construction
• EPS core for superior strength to weight ratio

TECH SPECS

• 220 cm^2. WS 370.AR 6.4
• 300cm^2. WS 430, AR 6.4

Set includes:

Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws

HIGH PERFORMANCE - LIGHT WEIGHT

Sizes: X950 / X1300 / X1600 / X1950

DESIGN PROFILE
Swept LE, Straight TE, Lean draft forward profile, moderate anhedral.

WING FEATURES

• Loose and agile feel for superior maneuverability
  
• Optimal efficiency and lift
• Integrated fuselage with tapered fit
• Incredible torsional stiffness and minimum drag
• Full prepreg carbon construction
• EPS core for superior strength to weight ratio
• Moderate anhedral for a more efficient lift platform
• Draft forward profile for a forgiving ride and early predictable lift

 TECH SPECS

• X950- 950cm^2, WS 630cm, AR 4.2, Vol 1.18L
• X1300- 1300cm^2, WS 780cm, AR 4.7, Vol 1.6L
• X1600- 1600cm^2 WS 900cm, AR 5.05, Vol 2L
• X1950- 1950 cm^2, WS 1000cm, AR 5.13, Vol 2.5L

Set includes:

Front wing, wing covers.

Sold Separately:

Your choice of Fusion base kit.

GLIDE SURF foil creates a playground for building new surfing sensations weather its surfing, kite foiling, wake foiling or pumping. With a stable and fast take off no matter the surf conditions, the GLIDE SURF delivers superior gliding and controlled speed to ride waves as far as they can flow. On the wave, the Glide Surf allows you to fly through the sections and progress from straight riding to progressive foil-turns. Your imagination is now the only limitation to how you will use the waves and how far you will fly.

Pump from one wave to the next - see how long you can fly!

• Small is recommended for Kite foiling, windfoiling and behind the boat
• Medium is recommended for Kite foiling, windfoilding, Prone surfing and behind the board
• Large is recommended for Prone surfing, paddle foiling, pumping, behind the boat, wingfoiling

INFO ON GLIDE SURF FOILS

GLIDE SURF TIPS AND TRICKS

DESIGN PROFILE
Swept outline, Ultra lean efficient profile, moderate anhedral

WING FEATURES

• Loose and agile feel for superior maneuverability
  
• Ultra lean profile for wide speed range
  
• Integrated fuselage with tapered fit
• Incredible torsional stiffness 
• Full prepreg carbon construction
• PMI core for superior strength to weight ratio
• Moderate anhedral for a more efficient lift platform

 TECH SPECS

• H650- 650cm², WS 720, AR 7.9, Chord 125mm
• H800- 800cm², WS 900, AR 9.9, Chord 125mm
• H1000- 1000cm², WS 900, AR 8.1, Chord 155mm
• H1200- 1200cm², WS 900, AR 6.7, Chord 185mm

Set includes:

Front wing, wing covers.

[]

HIGH PERFORMANCE - LIGHT WEIGHT

Sizes: 70 CM / 80CM

The all new Fusion ecosystem sets a new benchmark in Cabrinha's foil design & manufacturing capabilities. Performance & function is at the heart of the design process.

Each Individual part has been redesigned on both component and connection level with an option to interchange any part in the system.  This effortlessly simple system puts complete customization in your hands and the new X:Series Wing options will open the door to progression on whatever craft you choose to use them with. We proudly invite you to build your dream ride...

The Fusion Hybrid is an efficient blend of premium components that result an incredibly rigid & hydrodynamic structure. It seamlessly integrates into all 9cm industry standard foil boxes

The redesigned fuselage connection platform allows the mast to tightly lock into place to withstand the vertical and horizontal forces involved in all foil disciplines.

DESIGN PROFILE Durability, longevity and unmatched stiffness in an alloy setup.

MAST FEATURES

• Fixed top plate with m8 slots for easy mounting
• 3-screw connection for superior rigidity
• Aircraft grade extruded, anodized 6061-T6 aluminum
• Precision tapered fuse-to-mast connection for optimal rigidity
• Helicoil inserts minimizes corrosion and provides long lasting durability
• Water tight hollow design for optimal strength to weight ratio

FUSELAGE FEATURES

• Precision CNC machined aircraft grade, anodized 6061-T6 aluminum
  
• Helicoil inserts minimizes corrosion and provides long lasting durability
• Interchangeable rear fuselage for optimal performance and easy travel
• Sold with 343mm fuselage for superior maneuverability
• Sold as accessory:  416mm fuselage for a perfect balance of stability and ease of use
• Recessed stabilizer mounting surface for minimal drag

Set includes:
Mast, rear fuselage, travel bag, 8pcs m6 ss316 torx ti coated screws and torx tool.

Sold Separately:
Your choice of front and rear wing.

HIGH PERFORMANCE - LIGHT WEIGHT

Sizes: 70 CM / 80CM

The all new Fusion ecosystem sets a new benchmark in Cabrinha's foil design & manufacturing capabilities. Performance & function is at the heart of the design process.

Each Individual part has been redesigned on both component and connection level with an option to interchange any part in the system. This effortlessly simple system puts complete customization in your hands and the new X:Series Wing options will open the door to progression on whatever craft you choose to use them with.
We proudly invite you to build your dream ride...

The Fusion Carbon kit puts performance above all else. The EPS, prepreg carbon construction gives insane stiffness in a lightweight package. It seamlessly integrates into all 9cm industry standard foil boxes. The redesigned fuselage connection platform allows the mast to tightly lock into place to withstand the vertical and horizontal forces involved in all foil disciplines. 

DESIGN PROFILE
Ultimate stiffness to weight ratio and minimum drag.

 MAST FEATURES

• Integrated baseplate for superior stiffness and reduced weight
  
• I-beam full carbon pre-preg construction.
• EPS core for superior strength to weight ratio
• Precision tapered fuse-to-mast connection for optimal rigidity
• Tapered chord for reduced drag
• 3-screw connection with threaded brass inserts

 FUSELAGE FEATURES

• EPS core for superior strength to weight ratio
  
• Full carbon prepreg construction
  
• ss316 m6 inserts
  
• Interchangeable rear fuselage for optimal performance and easy travel
• 343mm rear fuse for superior maneuverability
• recessed stabilizer mounting surface for minimal drag

Set includes:
Mast, rear fuselage, travel bag, 5pcs m6 ss316 torx ti coated screws and torx tool.

Sold Separately:

Your choice of front and rear wing.

The HS180 High Aspect Stabilizer has been seamlessly molded as one single component into the fuselage to give exceptional efficiency and stiffness. This allows the rider complete control through varying degrees of the turn and has been precisely tuned for use with all H-series and X-series wings.

- - -

DESIGN PROFILE
Swept outline, ultra lean efficient profile and moderate anhedral

- - -

WING FEATURES

• Optimal efficiency and maneuverability
• Flat center, to downward tips, for perfect balance between locked-in feel and agility
• Single molded components for minimal drag
  
• Full prepreg carbon construction
• PMI core for superior strength to weight ratio

TECH SPECS

• 420mm, 180 cm², AR 9.8

Set Includes:

Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws.

HIGH PERFORMANCE - LIGHT WEIGHT

Sizes: 70 CM / 80CM

The all new Fusion ecosystem sets a new benchmark in Cabrinha's foil design & manufacturing capabilities. Performance & function is at the heart of the design process.

Each Individual part has been redesigned on both component and connection level with an option to interchange any part in the system. This effortlessly simple system puts complete customization in your hands and the new X:Series Wing options will open the door to progression on whatever craft you choose to use them with.
We proudly invite you to build your dream ride...

The Fusion Carbon kit puts performance above all else. The EPS, prepreg carbon construction gives insane stiffness in a lightweight package. It seamlessly integrates into all 9cm industry standard foil boxes. The redesigned fuselage connection platform allows the mast to tightly lock into place to withstand the vertical and horizontal forces involved in all foil disciplines. 

DESIGN PROFILE
Ultimate stiffness to weight ratio and minimum drag.

 MAST FEATURES

• Integrated baseplate for superior stiffness and reduced weight
  
• I-beam full carbon pre-preg construction.
• EPS core for superior strength to weight ratio
• Precision tapered fuse-to-mast connection for optimal rigidity
• Tapered chord for reduced drag
• 3-screw connection with threaded brass inserts

 FUSELAGE FEATURES

• EPS core for superior strength to weight ratio
  
• Full carbon prepreg construction
  
• ss316 m6 inserts
  
• Interchangeable rear fuselage for optimal performance and easy travel
• 343mm rear fuse for superior maneuverability
• recessed stabilizer mounting surface for minimal drag

Set includes:
Mast, rear fuselage, travel bag, 5pcs m6 ss316 torx ti coated screws and torx tool.

Sold Separately:

Your choice of front and rear wing.

GLIDE WIND is our friendly, easy-cruising and carving foil, also suitable for wave riding and basic freestyle moves. Ever dreamed about foiling but felt that it might be too dangerous or difficult? GLIDE WIND is the perfect tool to get you into foiling.
The lowest possible speed is required to take-off allowing first time foilers to feel safe and comfortable. This all-round foil focuses on extreme stability and early flying. It is designed with round edges on the wings for safety, and has been engineered to prevent catapults and to allow soft landings.

GLIDE WIND creates foilers.

HIGH PERFORMANCE - DURABILITY

SIZES: 40 / 70 / 90 CM MAST

The Fusion Alloy mast is constructed from extruded aircraft grade aluminium that result in an incredibly rigid & hydrodynamic structure. Helicoil inserts eliminate salt water corrosion around the screw connection points. It seamlessly integrates into all 9cm industry-standard foil boxes.

The Charger’s rear wings are available in two sizes, both made of pre-preg carbon 220 and 300. The 220 is the carving specialist wing. This rear wing is the loosest and the most performance-oriented rear wing. The 300 is the more stable of the two rear wings; this rear wing is geared best for learning and flat-water riding. Pair this rear wing with our 414 fuselages for an incredibly stable system. 

split

• Full pre-pre carbon construction
  
• EPS core for superior strength to weight ratio

split

• 220- SA 220cm², WS 370mm, AR 6.4
  
• 300- SA 300cm², WS 430mm, AR 6.4

SA = Surface Area, WS = Wing Span, AR = Aspect Ratio.

split

Features

• Sizes: 220, 300
  
• Full pre-preg carbon construction
• EPS core for superior strength to weight ratio
• Draft forward profile for a forgiving ride and early predictable lift
• Padded EVA covers
• SS 316 screw set

Dakine's foil kit is light and fast. It is designed to get you charging. This foil is designed to get you out of the water and foiling no matter what your discipline of choice is. These high lift, medium aspect foils are well suited for foil surfing, kite foiling, and wing foiling. The pre-preg carbon wings feature an integrated fuselage for superior stiffness and control. The forward draft profile of the front wing delivers a stable and predictable lift. The kit comes in three sizes 1300, 1600, and 1950. Each kit comes with everything you need: your choice of the front wing, 70cm mast, 346 fuselages and 220 rear wings, and all the required hardware. 

MATERIALS

• Full pre-preg carbon construction
• EPS Core for superior strength to weight ratio

DIMENSIONS

Included in each kit:

• 1300 - [ Front Wing-1300 ] [ Mast-70cm ] [ Fuselage-346 ] [ Rear Wing-220]
  
• 1600 -   [ Front Wing-1600 ] [ Mast-70cm ] [ Fuselage-346 ] [ Rear Wing-220]
  
• 1950 -   [ Front Wing-1950 ] [ Mast-70cm ] [ Fuselage-346 ] [ Rear Wing-300]
• All kits include:  Padded EVA Covers, Torx Tool T30 / T40 and SS316 Screw Set

Front Wing Dimensions:

• 1300- SA 1300cm², WS 780mm, AR 4.7, Vol 1.6L
  
• 1600- SA 1600cm², WS 900mm, AR 5.05, Vol 2.0L
  
• 1950- SA 950cm², WS 1000mm, AR 5.13, Vol 2.5L

SA = Surface Area, WS = Wing Span, AR = Aspect Ratio and Vol = Volume.

Rear Wing Stabilizer Dimensions:

• 220- SA 220cm², WS 370mm, AR 6.4
  
• 300- SA 300cm², WS 430mm, AR 6.4

SA = Surface Area, WS = Wing Span, AR = Aspect Ratio.

FEATURES

• Integrated fuselage with tapered fit
  
• Superior torsional stiffness and minimum drag
• Full pre-preg carbon construction
• EPS core for superior strength to weight ratio
• Moderate anhedral for a more efficient lift platform
• Draft forward profile for a forgiving ride and early predictable lift

GLIDE SURF foil creates a playground for building new surfing sensations weather its surfing, kite foiling, wake foiling or pumping. With a stable and fast take off no matter the surf conditions, the GLIDE SURF delivers superior gliding and controlled speed to ride waves as far as they can flow. On the wave, the Glide Surf allows you to fly through the sections and progress from straight riding to progressive foil-turns. Your imagination is now the only limitation to how you will use the waves and how far you will fly.

BASE SYSTEM

GLIDE SURF Carbon comes with the integrated adapter plate and mast in carbon. Thanks to this direct integration of the adapter plate into the mast the whole Foil construction is heavy duty but still light weight. 

Pump from one wave to the next - see how long you can fly!

• Small is recommended for Kite foiling, windfoiling and behind the boat
• Medium is recommended for Kite foiling, windfoilding, Prone surfing and behind the board
• Large is recommended for Prone surfing, paddle foiling, pumping, behind the boat, wingfoiling

INFO ON GLIDE SURF FOILS

GLIDE SURF TIPS AND TRICKS