75 products
NeilPryde Fly Wing
NPFLYW-001-14
Regular price Sale price $769.00 Save $0.00High lift, ultra efficient wing. Dramatically increased range and power, allowing you to use a far smaller wing than is typical in each set of conditions.
Important note: No leash included.
HIGH LIFT CONCEPT
Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability.
HIGH TENSION CANOPY WITH STRUCTURED CAMBER LENS
The 3D shape of the canopy leading edge is defined by a series of transverse panels that converge at the wingtips. This leverages the LE Tube structure to maximize tension in the critical entry sections – the result is more lift and a higher stall angle for better acceleration in light winds, and the ability to fly efficiently at low angles of attack for better control and higher top speeds in strong winds.
VENTED STRUT
The large opening between the LE and the front of the fill panel (which connects the canopy to the strut) allows the pressure to equa
NeilPryde SPX 90 RDM | 95 SDM Mast
RMSPX-90STD340
Regular price Sale price $649.00 Save $-649.00NeilPryde TPX100 Mast
RMTPX100-RSTD340
Regular price Sale price $749.00 Save $0.00Our top of the line mast and the fastest, most flexible mast in the range. The 100% carbon prepreg construction uses the Torq-Preg. This unique prepreg material features +/- 45 degree fiber orientation. This helps to control torsion, particularly in the boom area. Due to its construction, the mast is extremely lightweight while having a very fast response time.
HIGH HOOK ELITE CE50
W9VC0C724001234
Regular price $119.99 Sale price $71.99 Save $48.00Our flotation vests are CE50 certified and- thanks to the inner foam- have a high buoyancy. The vests are super light and comfortable to wear.
NeilPryde 23 Combat
B3SACOMBTP01033
Regular price Sale price $899.00 Save $0.00Our World Cup Team Riders' sail of choice.
Combat Pro is the epitome of wave sail development. Power when you need it, neutral on the wave and built to withstand everything Mother Nature can throw at you. Trusted by our team from Peahi to Pozo, Combat feels light in your hands yet provides power when you need it and will always perform, no matter the conditions.
Pro HD construction combines the Pro features of the Combat Pro with an X-Ply centre window for an even more bullet-proof sail. This results in a lighter sail and a slightly softer feeling than the Pro construction.
HD construction is our most affordable construction. Featuring regular X-Ply and Radial HD 2.0 in key load areas of the sail which emulates the dynamic load distribution of Powerfuse but with a simpler, stitched construction in order to reduce construction cost.
NeilPryde SPX 65 Mast
RMSPX-65STD430
Regular price Sale price $649.00 Save $-649.0065% carbon. Practically Indestructible.
Excellent reflex performance with unprecedented strength.
We balanced the lower carbon content with fiberglass prepreg layers in the lamination process to make this mast virtually indestructible! The thicker fiberglass wall of the mast makes it immune to ovalization under compression.
MXT 34 RDM Alloy
REMXTRA 001034
Regular price $148.00 Save $0.00Used by most sailors on the PWA TOUR, the Mono-Button Mast Base and Extension System (MXT) has been designed to offer a secure, heavy duty connection and ease of operation.
The MXT Extensions are fully integrated with stainless steel cleat/pulley bottom assemblies offering the best weight to stiffness ratio and creating very light but also very strong extensions. The weight has been reduced by eliminating all unnecessary plastic while increasing the cross-section of stainless steel parts for increased strength. This part can now withstand over 900kg of downhaul load – twice as much as used on the largest racing sails.
The special geometry with tilt bottom pulley makes perfect sail pulley/rope alignment. This allows the sail to be downhauled all the way down (block-to-block) and it reduces downhauling friction.
Weight: 0,80 kg
NeilPryde 23 RS: Racing Evo XIV
B3SAEVO14X11049
Regular price Sale price $1,549.00 Save $0.00Completely redesigned for 2023, our most technologically advanced Slalom sail ever.
Designed from the ground up with our new state-of-the-art 3D design software.
Entire sail is modeled in 3D in its actual flying shape with twist and luff curve accounted for.
Our quadruple luff panel allows us to align panels with the highest loads.
Full carbon battens above the boom offer ultimate performance and weight.
NeilPryde 23 V8
B3SV8XXXX008057
Regular price Sale price $999.00 Save $-999.00Race sail performance without the encumberments of a pure slalom sail. 2 cams and a narrower luff sleeve make the V8 easier to rig, gybe and waterstart than a pure race sail.
Don’t let the ease of use fool you though, V8 can hold its own around a race course and boasts even better early planning than even the most advanced slalom sails. Perfectly suited for foil or fin.
NeilPryde SPX70 SDM | RDM
RMSPX70R0STD370
Regular price Sale price $399.00 Save $0.0070% carbon. Practically Indestructible.
Excellent reflex performance with unprecedented strength.
We balanced the lower carbon content with fiberglass prepreg layers in the lamination process to make this mast virtually indestructible! The thicker fiberglass wall of the mast makes it immune to ovalization under compression.
TPX and SPX masts are finished using our unique, “Shark skin” surface texture layer. This low friction surface finish prevents wet materials from sticking to the mast surface and reduces friction.
ALU MXT SDM EXTENSION 48
REMXTAS STD048
Regular price $167.99 Save $0.00Used by most sailors on the PWA TOUR, the Mono-Button Mast Base and Extension System (MXT) has been designed to offer a secure, heavy duty connection and ease of operation. The MXT Extensions are fully integrated with stainless steel cleat/pulley bottom assemblies offering the best weight to stiffness ratio and creating very light but also very strong extensions.
The weight has been reduced by eliminating all unnecessary plastic while increasing the cross- section of stainless steel parts for increased strength.This part can now withstand over 900kg of downhaul load twice as much as used on the largest racing sails.
The special geometry with tilt bottom pulley makes perfect sail pulley/rope alignment. This allows the sail to be downhauled all the way down (block-to-block) and it reduces downhauling friction.
Weight: 0,85 kg
Sign up to our newsletter for exciting news on product launches, special promotions, events and more.