Name: 02S MANTIS WINDOWLESS
Brand: Cabrinha
SKU: K2KWMANTS045001
Price: 404.55 USD
Availability: InStock

Cabrinha

02S MANTIS WINDOWLESS

K2KWMANTS045001

$899.00 $404.55 Save $494.45

Shipping calculated at checkout.

GRADE B WINGS - Lightly used and may contain a patched pin hole(s).

The original Mantis set a benchmark with regards to leading edge rigidity, and this year it has been even further refined, culminating in an ultra-rigid frame and also refined profile. Combined with a pretensioned canopy, this gives a crisp high performing product that maintains its performance through a wider range of conditions.

Refined sizing and wingspans allow for more progressive power in the small sizes, while the wingtip shape adjustment helps deflect water during start up, and also allows for deeper profiles to aid in power delivery.

The Mantis V2 showcases Cabrinha’s forward driving wing program and puts the ultimate in technology and efficiency into your hands to maximize water time and performance.

- - -

DESIGN PROFILE

Leading Edge Inflatable Dihedral with a medium aspect ratio outline, rigid frame and lightweight design.

- - -

FEATURES

NEW increased dihedral: Balanced dihedral for power to stability ratio
NEW revised twist for improved range
High Center-LE diameter and progressive taper, for improved stiffness & canopy tension, with upwind efficiency
Controllable power in a wide range of wind conditions
HD large diameter closing seam construction
Balanced dihedral for power-to-stability ratio
High rigidity single strut for low weight and predictable depower
Nano Tech Ripstop
High Tenacity Dacron LE
Sprint Inflate Valve
Extremely safe operation
Kevlar wing tip reinforcement
Safety wrist leash not included

Cabrinha

03S Mantis

K3KWMANTS025011

$749.00 $449.40 Save $299.60

Shipping calculated at checkout.

If there is one wing that has helped shape and define the sport, it’s the Mantis.

Now in its 3^rd generation the wing which set the benchmark for stability and rigidity has been further refined to maximize the true potential of wing foiling.

Increased convex dihedral has helped expand the range of the Mantis by providing an increased power to stability ratio, combined with the new Convex Strut the Mantis V3 is the cleanest and most efficient wing to date. A refined air foil section in the critical area of the kite has helped increase the low end power of the Mantis, further increasing its range of use.

DESIGN PROFILE

High rigidity LE Inflatable, Low Dihedral with full powerful profile, Medium AR and convex strut.

FEATURES

NEW: Refined lightweight canopy design for reduced weight and reactive performance
High Tenacity dacron for enhanced dihedral stability and improved handling characteristics
HD large diameter UHMPWE reinforced closing seam construction
Nano Ripstop Canopy, the benchmark in durability, stability and responsiveness
NEW: Sprint 3.0
NEW: Durable TPU bumpers
NEW: Handles - Fully moulded composite widespan handles
Hi-vis, Weather resistant, low elongation TPU window
Load path panel layout
High reactive front handle
High rigidity centre section stitching design
Lightweight TPU bladders
NEW: fine tuned size progressive wing tip twist for forgiving sheeting
NEW: Increased convex dihedral for power-to-stability ratio
NEW: refined airfoil centre section for low end power
NEW: Convex strut for added rigidity
NEW: Dump valve for fast deflate

CONVEX DIHEDRAL

The increased Convex Dihedral has helped expand the range of the Mantis by providing an increased power to stability ratio.

LOAD PATH

The Load Path Panel Layout has been carefully designed to help mitigate the varying loads and elongation that occur on wings, translating into a cleaner and more structural product in a wider range of conditions.

REFINED FRAME

Refinements to the Frame of the Mantis V3 have allowed for a reduced weight, but increased reactive performance.

RIGID STRUT

The Convex strut on the Mantis V3 provides a stiffer and more reactive connection between the rider and wing.

HD LARGE DIAMETER CLOSING SEAM

A larger stiffer diameter LE requires an updated closing seam contribution to withstand the unique forces that winging provides.

PURE IMPULSE FRONT HANDLE

Infused with the technology of the Widespan Handles, the Pure Impulse front handle provides a direct location for carrying, maneuvering and also for controlling the wing.

Cabrinha

03S Mantis Apex

K3KWMANTA040011

$1,599.00 $959.40 Save $639.60

Shipping calculated at checkout.

The Mantis has become synonymous with its outstanding range and versatility. Not only does the wing perform amazingly in waves, on ocean downwinders, but it’s also proved itself to excel on the racecourse or on the lakes and flat water venues.

The Mantis Apex series takes the performance to a whole new level through the introduction of the Ultra HP frame material. Aside from a 22% weight saving in frame material, the big benefit comes from the ability to hold higher pressures, allowing us to reduce the LE diameter while maintaining stiffness. This leads to a leaner profile and a higher performing product.

DESIGN PROFILE

Visibility
High pressure leading Edge Inflatable Dihedral with a medium aspect ratio outline
Efficient profile and ultra lightweight design

FEATURES

Medium Dihedral
Refined wingtip twist for increased sheeting range
Lean LE profile
Controllable power in a wide range of wind conditions
High pressure reflex frame - Ultra-HP - inflated structure
High rigidity single strut for low weight and predictable depower
2x Sprint inflate Valve for maximum airflow
EVA Hi-Aero, light weight battens for increased leech stability
Hi-vis, Weather resistant, low elongation TPU window
Widespan anti-twist handles
Load path panel layout

MEDIUM DIHEDRIAL

The Mantis Apex utilizes a medium Dihedral design to deliver a precisely balanced power to stability ratio. This translates to precision handling and feedback from the wing.

TIP TWIST

Refined wingtip twist allows for wing to breathe while maintaining canopy tension.

LEAN LE

Thanks to Ultra-HP the Mantis Apex has a lean profile for efficient upwind performance, wide speed range and an extremely responsive frame.

STIFF STRUT

A highly rigid single strut for low weight and predictable depower.

20/20 VISION

A refined window layout, made from weather resistant TPU provides increased visibility when riding.

POWER CONTROL

Through a combination of Ultra-HP material, refined profiles and Tip Twist, the Mantis Apex has incredible controllable and power in a wide range of wind conditions.

Cabrinha

03S Vision

K3KWVSNXX030002

$799.00 $479.40 Save $319.60

Shipping calculated at checkout.

Vision is a word that can mean multiple things. It could be said that it relates to the increased range of sight that was incorporated into this new wing through strategic window placement, or its new outlines, or it could mean the act of foresight to see where this incredible sport is going, and to create a product for the next generation of wing foilers. How ever you take it, the new Cabrinha Vision is the next generation wing from the Cab Design Works Team.

DESIGN PROFILE

High rigidity LE Inflatable, High reactive Dihedral with high lift profile, Medium AR and convex strut

FEATURES

NEW: Refined lightweight canopy design for reduced weight and reactive performance
High Tenacity dacron for enhanced dihedral stability and improved handling characteristics
HD large diameter UHMPWE reinforced closing seam construction
Nano Ripstop Canopy, the benchmark in durability, stability and responsiveness
NEW: Sprint 3.0
NEW: Durable TPU bumpers
NEW: Handles - Fully moulded composite widespan handles
Hi-vis, Weather resistant, low elongation TPU window
Load path panel layout
High reactive front handle
high rigidity centre section stitching design
Lightweight TPU bladders
NEW: fine tuned size progressive wing tip twist for forgiving sheeting
NEW: high dihedral for great upwind stability, reactive handling and a balanced flex
NEW:full airfoil centre section for low end power
New: Convex strut for added rigidity
Harness line attachment point
NEW: Dump valve for fast deflate

HIGH DIHEDRAL

The Vision has the highest amount of Dihedral in the Cabrinha range which helps greatly in upwind stability and reactive handling.

FULL AIRFOIL

The full centre section airfoil increases the low end power helping you get up and going with minimal effort.

SIZE DOES MATTER

The small sizes excel in high winds due to the reactive sheeting, where are as the largest 8m was designed purely as a light wind wing to get you out when most are sitting on the beach.

STIFF STRUT

The Convex strut on the Vision provides a stiffer and more reactive connection between the rider and wing.

20/20 VISION

A refined window layout, made from weather resistant TPU provides increased visibility when riding.

TIP TWIST

Progressive tip twist as the sizing increases in the Vision range helps keep sheeting relative and responsive no matter what size wing you ride.

Cabrinha

04 Cabrinha Mantis

K4KWMANTS-020003

$869.00 $651.75 Save $217.25

Shipping calculated at checkout.

The gold standard in winging is back with its 4th generation design.

Crafted for those who demand the best, the Mantis V4 is the pinnacle of stability, power and feel.

With a focus being made towards power distribution and torsional control and cleanliness, the 04 Mantis marks the biggest evolutionary step for this iconic wing.

The new spanwise load path panel layout, combined with the graduated TE load patch, make this the cleanest and highest performing Mantis to date.

*Includes: Bag, repair kit and stickers.

- - -

DESIGN PROFILE

High rigidity LE Inflatable, Low Dihedral with powerful profile, Medium AR and convex strut.

- - -

FEATURES

NEW: Convex strut for improved frame stiffness and extended TE canopy support
NEW: Graduated TE load distribution panel for improved efficiency of the loaded sail
NEW: refined airfoil flow
NEW: spanwise load path panel layout
NEW: Fully moulded composite widespan handles with indexing mounting interface.
NEW: Full rigid performance LE handle with anti-abrasion patch
NEW: 2-ply frame elbow panels for improved arc rigidity
NEW: Fine tuned size progressive wing tip twist for forgiving sheeting
High Tenacity Dacron for enhanced dihedral stability and improved handling characteristics.
Heavy duty UHMPWE reinforced closing seam construction
Nano Ripstop Canopy, the benchmark in durability, stability and responsiveness
Sprint 3.0 and deflate valve
Durable TPU bumpers
2-ply high rigidity centre load reinforcement for added arc and dihedral stability
Refined convex dihedral for power-to-stability ratio
Refined airfoil centre section for low end power

Cabrinha

04 Cabrinha Vision

K4KWVSNXX-020003

$869.00 $651.75 Save $217.25

Shipping calculated at checkout.

With the sport evolving at such an incredible rate, you need a wing that matches this evolution and takes us into the next generation of Wing Foiling.

Known for it’s incredible range and light feel, the Vision is back in 04. Increased low end power in the smaller sizes, refined airflow across the board, and the lightest weight light wind wings in the market, makes the new Vision the most all around wing out there.

Tall or small, crusing or wave riding, light winds or storm chasing. The Vision is the perfect addition to your wing quiver.

(Leash sold separately)

Click to view Wrist Leash
Click to view Waist Leash

- - -

DESIGN PROFILE

High rigidity LE Inflatable, High reactive Dihedral with high lift profile, Medium AR and convex strut.

- - -

FEATURES

NEW: Convex strut for improved frame stiffness and extended TE canopy support
NEW: graduated TE load distribution panel for improved efficiency of the loaded sail
NEW: refined airfoil flow
NEW: Spanwise load path panel layout
NEW: Fully moulded composite widespan handles with indexing mounting interface
NEW: Full rigid performance LE handle with anti-abrasion patch
NEW: 2 ply frame elbow panels for improved arc rigidity
NEW: Fine tuned size progressive wing tip twist for forgiving sheeting
NEW: Micro eva batten for improved TE stability
Hight Tenacity Dacron for enhanced dihedral stability and improved handling characteristics
Heavy duty UHMPWE reinforced closing seam construction
Nano Ripstop Canopy, the benchmark in durability, stability and responsiveness
Sprint 3.0 and deflate valve
Durable TPU bumpers
2-ply high rigidity centre load reinforcement for added arc and dihedral stability
Refined convex dihedral for power-to-strength ratio
High dihedral for great upwind stability, reactive handling and a balanced flex

Cabrinha

MANTIS WING WDW

K1KWMANTW-020008

$639.00

Shipping calculated at checkout.

There are a million new ways to fly. And the all new Mantis from Cabrinha is our most versatile way to take flight.

The Mantis is a streamlined, light weight but extremely rigid hand held wing that will power up any foilboard, surfboard, skate or snowboard. It has a simple inflated frame and single strut to keep things light and tight.

The Mantis is ideal for surfing. While fully depowered it will fly perfectly wherever you place it, or you can steer it through your turns with our unique front handle.

Generous, and strategically placed windows keep your range of visibility clear so you can focus on the task at hand, but what makes the Mantis an absolute joy to fly is its tightly controlled frame.

It’s stiffness allows you to power right through the gusts or take to the air.

Any way you want to fly it, the Mantis will deliver performance and predictability in an incredibly simple to use wing.

- - -

DESIGN PROFILE

Visibility, Leading Edge Inflatable Dihedral with a medium aspect ratio outline, rigid frame and lightweight design.

- - -

FEATURES

TPU window with center load seam
High Center-LE diameter and progressive taper, for improved stiffness & canopy tension, with upwind efficiency
Controllable power in a wide range of wind conditions
HD large diameter closing seam construction
Balanced dihedral for power-to-stability ratio
High rigidity single strut for low weight and predictable depower
Nano tech ripstop
High Tenacity Dacron LE
Sprint Inflate Valve
Extremely safe operation
Kevlar wing tip reinforcement
Safety wrist leash included

null