KITESURF
352 products
352 products
352 products
X SERIES MKII FRONT WINGS
K2FWXFWNG070XXX
Regular price $699.00 Save $-699.00
Through refined profiles, moderate aspect ratio and an all new wingtip shape, the X-Series MKII is the ultimate foil for maneuverability, no matter the board or sport you do.
The allround lean profile still maintains the forgiving low-end that the X-Series is known for, but now boasts an increased speed range.
The all new tip design allows you to be able to free the tips in a turn, but be confident that the foil will re-enter without cavitation. This is one specific area of research & testing undertaken at the SINTEF facility.
The ergonomic tapered connection between the fuselage and mast provides the ultimate in rigidity, while still being easy to assemble and disassemble.
Through the use of a PMI core and the layered Pre Preg carbon sheets, the X-Series MKII sets a new benchmark for hydrofoil torsional stiffness.
The medium aspect ratio design allows for early lift and a stable forgiving ride.
Brass 'through bolt' adds torsional stiffness to the wing / mast connection point.
Pre coated carbon sheets allow for an extremely accurate level of resin absorption. Combined with an exclusive interweave design that follows the shape and profile of the wings, you have unparalleled levels of torsional stiffness and reflex response.
The modularity of the CAB Fusion system allows you to seamlessly interchange between any of the X-Series and H-Series front wings and stabilizers.
LOGIC
K2FBLOGIC110XXX
Regular price $1,149.00 Save $-1,149.00Included with the board: m8 T nuts, Full DaKine EVA deck pad (NOTE: straps sold separately).
The rigid foam core construction transfers the power from your legs, efficiently through to the foil.
The planar deck shape allows for direct input and control over the foil, as well as a balanced feel under your feet.
The side cut Beveled rails not only help during hard carving maneuvers, but also help release the water flow when getting up and riding, and after a touch down.
The 3d Shaping on the bottom of the board helps during touch downs by dispersing water flow and reducing water adhesion. It also aids in getting up and going by helping with directional stability when not on the foil.
The aggressive kick tail allows for earlier flight by reducing the board stiction to the water and allowing the water in contact to flow and release of the tail when getting up on the foil.
Choose between 2 straps or 3 strap stance options with a variety of angle degree's, based on your riding style.
An EPS core with a bamboo laminate provides the ultimate in strength to weight ratio. This durable construction also helps transfer the power load down through your feet and into the foil.
Through the exclusive Cabrinha design we are able to allow for endless strap options to suit your style of riding. Single Straight, Y Strap, offset, goofy or regular, the choice is yours.
Made from Dakine Friendly Foam biodegradable EVA, the full deck traction pad has been designed purely with foiling in mind. Low Profile corduroy grooving provides the perfect blend of comfort and traction and the cutouts have been placed in the locations where extra grip is needed.
V SERIES REAR WING STABILIZERS
K2FWVSWNG180XXX
Regular price $219.00 Save $-219.00Stealth Bar Kite
35009.190135.240
Regular price $119.99 Save $-119.99Sizes: 240mm, 280mm, 320mm
We proudly introduce the Stealth Bar. The Stealth Bar is the result of 3D computer modelling and countless hours of on-water testing. Mystic’s new molded fiber-injection construction provides an unprecedented strength to weight ratio while the Stealth Bar’s slim, ergonomic design combined with the new integrated Fender-Shield minimizes pressure points, and the Stealth Wings keeps the bar held securely in place. The Stealth Bar offers a truly unrivaled level of fit, support, comfort, and performance.
The new Stealth bar with the traditional stainless steel kite hook is designed for (unhooked) freestyle and freeride users.
The sizing and shape of the bar is redefined to reduce pressure points while the lever-lock system ensures easy closure and torsion control.
FOIL HARDWARE TOOL ROLL
D2BDBFHRBLASTD
Regular price $29.00 Save $-29.00WING TRAVEL WAGON
D2BGBWTWBLK150
Regular price $399.00 Save $-399.00The wing travel wagon is designed to get your wing or E-foil to its destination safely. This sturdy coffin-style bag is ready to roll through airports and train stations alike, with ample space for foils, kites/wings, boards, batteries, and harnesses. It comes equipped with integrated bungee storage to secure your foils and accessories, as well as a heavy-duty board divider to keep your board protected from your foils.
CHARGER REAR WING
D2HGFCHAFWI300
Regular price $229.00 Save $-229.00The Charger’s rear wings are available in two sizes, both made of pre-preg carbon 220 and 300. The 220 is the carving specialist wing. This rear wing is the loosest and the most performance-oriented rear wing. The 300 is the more stable of the two rear wings; this rear wing is geared best for learning and flat-water riding. Pair this rear wing with our 414 fuselages for an incredibly stable system.
SA = Surface Area, WS = Wing Span, AR = Aspect Ratio.
CHARGER FRONT WINGS
D2HGFCHAFWI160
Regular price $469.00 Save $-469.00Dakine's foil kit is light and fast. It is designed to get you charging. This foil is designed to get you out of the water and foiling no matter what your discipline of choice is. These high lift, medium aspect foils are well suited for foil surfing, kite foiling, and wing foiling. The pre-preg carbon wings feature an integrated fuselage for superior stiffness and control. The forward draft profile of the front wing delivers a stable and predictable lift. The kit comes in three sizes 1300, 1600, and 1950. Each kit comes with everything you need: your choice of the front wing, 70cm mast, 346 fuselages and 220 rear wings, and all the required hardware.
MATERIALS
DIMENSIONS
Included in each kit:
Front Wing Dimensions:
SA = Surface Area, WS = Wing Span, AR = Aspect Ratio and Vol = Volume.
Rear Wing Stabilizer Dimensions:
SA = Surface Area, WS = Wing Span, AR = Aspect Ratio.
FEATURES
MKII ALLOY MAST
K2FSMASTA065XXX
Regular price $209.00 Save $-209.00
The ergonomic tapered connection between the fuselage and mast provides the ultimate in rigidity, while still being easy to assemble and disassemble.
Highest quality anodized 6061 Aluminum provides not only strength and rigidity, but also longevity in salt water conditions.
Low drag design to maximize hydrodynamic efficiency
'Locked-in' mast to fuselage connection giving an exceptional torsional stiffness.
Helicoil inserts prevent corrosion and wear.
The modularity of the CAB Fusion system allows you to seamlessly interchange between any of the X-Series and H-Series front wings and stabilizers.
Brass 'through bolt' adds torsional stiffness to the wing / mast connection point.
RENEGADE HELMET
D2AHMTREBLK0XS
Regular price $69.00 Save $-69.00This lightweight helmet is designed to keep your head safe, whether kiteboarding, windsurfing, foiling, winging, or wakeboarding. It features non-water-absorbing EVA padding and a rear adjustment system for the perfect fit. It also features removable ear covers to prevent hearing damage from water impacts.
Dakine Pump
D2HGPUMPSTD00S
Regular price $54.00 Save $-54.00
SLIDER BAG
D0BDBSLBBLA140
Regular price Sale price $90.00 Save $-90.00Special Edition USA Made Spectrum
K1TTSPCTM133002
Regular price $479.00 Save $-479.00
The spectrum continues to gain traction and star status in the Cabrinha lineup. No other board matches its ease of use and friendly ride characteristics.
The spectrum has incredible upwind tracking while the softer flex pattern turns choppy water into a smooth forgiving ride. Whatever the conditions present, the spectrum's versatility gives you the confidence to go out and perform.
- - -
DESIGN PROFILE
A fast and forgiving outline with a medium amount of rocker.
- - -
FEATURES
Included with the board:
4x 50mm fins, 4x washers, 10 x m6 x 16mm screws, grab handle.
Vega DLX Harness
D3KHAVDHBLA00S
Regular price Sale price $189.00 Save $-189.00
C-1 HAMMERHEAD
D0KHAC1HBLA0XS
Regular price Sale price $240.00 Save $-240.00Harness the power for your traction activities - waist style harness suitable for all land and water based activities.
The Dakine C-1 is a hard shell harness with a low profile fit that is created with a shape shifting Adaptive Fit Composite (AFC) shell design that molds itself over time to match the rider's body for a customised low profile fit.
The AFC is thermo-pressure sensitive which, over time, allows the harness to adapt its shape to match the rider’s body, creating a custom fit. The C-1 combines adaptive fit technology with exceptional power transfer from the kite, creating unparalleled comfort and performance for the rider.
Completely redesigned using Dakine's unique multiple panel outer shell to create the best fitting waist harness ever.
The inner is specifically designed to give lumbar support and comfort with or without a wetsuit.
Features Include:
Sizes
|
Inches
|
Centimetres
|
Small
|
30-32
|
76-81
|
Medium
|
32-34
|
81-86
|
Large
|
34-36
|
86-91
|
Extra Large
|
36-38
|
91-96
|
MANIAC RETRO KIT 8" BLACK
D8HACMRKBLA008
Regular price $32.00 Save $-32.00Sign up to our newsletter for exciting news on product launches, special promotions, events and more.